Welcome to China TJK Machinery Beijing Co., Ltd. Call us!+86 10-84927034 or +86 13910833898 sitemap

sales@chinatjk.com;info3@chinatjk.com

China TJK Machinery Beijing Co., Ltd.

LOCATIONProducts > Stirrup Bending Machine > Steel Bar Bending Machine

Steel Bar Bending Machine

Stirrup Bender WGZ12F

Stirrup Bender WGZ12F calculate total length by computer to cut before bending, Stirrup Bender WGZ12F have two blade(one at the end of machine, the other one is beside the bending head and two sets wheels.


Features of Stirrup Bender WGZ12F


 

 Precut steel bar 6-13mm is workable;

It's a multi-functional pre-cut steel bar bending machine, it can automatically process a variety of stirrups within length of 2100mm, it can also be automatically processed within 9m of various plate reinforcement;

 

 

Equipped with the double-shear mechanism and loopback bending function, also equipped with material optimization function, the wire can be cut from the end of a set length, combined with loopback bending function making up to 100% of the use of the entire wire.

Automatic wire feeding system which designed with accurate guide position and counting detection mechanism, it making automatically put the steel from the feed port automatically sent to the host, the automatic wire can be completed within 2 seconds, simple and reliable operation, greatly improving the straight bar steel processing effectiveness;

 

 

Four-wheel servo drive loopback bending mechanism design ensures the returning feeding accuracy of ± 1mm;

Machine has disc bending mechanism which avoids the stirrups collision and ensures the product pass rate of 100%;


More Detail Stirrup Bender WGZ12F

Stirrup Bender WGZ12F calculate total length by computer to cut before bending, Stirrup Bender WGZ12F have two blade(one at the end of machine, the other one is beside the bending head and two sets wheels, two feeding units which the first one for bending the front end and the other will hold the rebar and let the rear end bent . Stirrup Bender WGZ12F no need retreat leave ends


Technical Data of Stirrup Bender WGZ12F


Production capacity

Single(Double) wire

Φ6 – 13 [mm]

Max. bending angle

±180° [double direction]

Max. bending speed

1200 [°/sec]

Max. pulling speed

110 [m/min]

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average air-compressed consumption

6 [l/min]

Average electric power consumption

4 [KW/H]

Labeled electric power

28 [KW]

Voltage

380 [V] – 50 [Hz]

Overall machine weight

5160 [Kg]

Overall dimension

11700*1760*2730[mm]

Bending direction

Bi-direction



Stirrup Bender WGZ16F


Stirrup Bender WGZ16F calculate total length by computer to cut before bending, Stirrup Bender WGZ16F have two blade(one at the end of machine, the other one is beside the bending head and two sets wheels.


Features of Stirrup Bender WGZ16F

Stirrup Bender WGZ16F calculate total length by computer to cut before bending, Stirrup Bender WGZ16F have two blade(one at the end of machine, the other one is beside the bending head and two sets wheels, two feeding units which the first one for bending the front end and the other will hold the rebar and let the rear end bent . Stirrup Bender WGZ16F no need retreat leave ends.


Technical Data of Stirrup Bender WGZ16F


Production capacity

Single(Double ) wire

Φ8-16 [mm]

Max. bending angle

±180° [double direction]

Mandrel diameter

Φ30 / Φ42 [mm](customizable))

Max. bending speed

1200 [°/sec]

Max. pulling speed

100 [m/min]

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average electric power consumption

8 [KW/H]

Labeled electric power

69 [KW]

Voltage

380 [V] – 50 [Hz]

Overall machine weight

10t

Overall dimension

12800*2150*3050 [mm]

Bending direction

Bi-direction



Stirrup Bender WGZ12B

Stirrup Bender WGZ12B cutting unit is high speed mechanical type, only need 0 45S of one cut, have passed 300 thousand times of high-frequency and rough condition operation test


Features of Stirrup Bender WGZ12B


Precut steel bar 6-14mm is workable, max wire length up to 1700mm ;

Duplex bending axis set being used,  a variety of molds are available for making different sizes of stirrups, workable with "8" type stirrups;

Automatic wire feeding system which designed with accurate guide position and counting detection mechanism, it making automatically put the steel from the feed port automatically sent to the host, the automatic wire can be completed within 2 seconds, simple and reliable operation, greatly improving the straight bar steel processing effectiveness;

 

 

Machine has disc bending mechanism which avoids the stirrups collision and ensures the product pass rate of 100%;

Equipped with multitasking optimization of steel, you can maximize the use of the entire wire;


More Detail Stirrup Bender WGZ12B

Features of Stirrup Bender WGZ12B

1. Rebar cutter and bender WGZ12B has 7 kinds of Mandrel units ensure the variety of products, minimum bending size 100X100mm;

2. Automatic feeding unit will feed the steel bars from inlet into the machine, it has precisely guided and counting units, feeding will be finished in 2 seconds;(UNIQUE TECHNOLOGY)

3. Designed for dust proof and enclosed type, operational safety, prolong service life by 50%;

4. Stirrup Bender WGZ12B designed of optimization of materials, maximum the utilization of steel bar.


Technological Design Characteristic of Stirrup Bender WGZ12B

1. Anti-skid slot on the driving wheels will prevent the steel bar from skidding;unti-loose and tightening technology are used on the end-face key, encoder equipped to ensure  precision of ±1m;

2. Disc- type bending unit made of stainless steel to avoid collision and ensure 100% qualification rate.(UNIQUE TECHNOLOGY)

3. Split type designed fixing cutter is easily maintained; Fixing cutter can be used both sides, prolonged service life; All four sides of mobile cutter can be used, prolong service life 4 times, greatly decreased customer’s cost.(UNIQUE TECHNOLOGY)


Advantages of Technical Data of Stirrup Bender WGZ12B

1. Stirrup Bender WGZ12B cutting unit is high-speed mechanical type, only need 0.45S of one cut, have passed  300 thousand times of high-frequency and rough condition operation test;

2. Capable operation with new Chinese 3rd class rebar, anti overloading, resists high temperature;

3. Driven by full closed loop type high precision servo motor ensure the length accuracy of ±1mm, angle accuracy ±1°;

4. Mandrel and molds on the bending unit, ensure the minimum side of rebar 100mm.


Features of Control System

International brand controller, HMI and Servo.

4 groups data base. Capable store 500 graphs.

2 Ethernet interface model RJ45, I+II type CF card slot.

Remote Internet diagnosis and program update function.


Features of mechanical parts

1. Cutter is made of alloy mould steels, follow the international acceptance standard of  NADCA207, the quality is 50%-80% higher than similar products in the world.

2. Made by the special heat-treatment process, ensure the cutter quality, prolong the service life to more than 100 thousand which is 10 times of normal kind die steels.

3. The driving wheel is made of new type high alloy wear-resistant steel, the level of material is 3 times higher than Chinese standard, vacuum heat-treatment is being used to ensure the wearability is 30%-50% higher than other high quality die steels, the quality is 3-5 times higher than normal kind of die steels.


Features of Processing Technology

Stirrup Bender WGZ12B has fully automatic CNC laser cutting center, the automatic welding robot, hundred of high precision vertical and horizontal machining center, ensure high precision machining, 100% exchanging rate.

Net Communication

Capable of connecting with Independent R &D TJK MAX MES system, high-efficiency operation, the system can be updated.

Technical Data of Stirrup Bender Rebar Bender and Cutter WGZ12B


Production capacity Single wire

Φ6 – 14 [mm]

Double wires

Φ8 – 10 [mm]

Max. bending angle

±180° [double direction]

Max. bending speed

1200 [°/sec]

Max. pulling speed

110 [m/min]

Mandrel diameter

Φ25 – Φ30 [mm]

Max. length of the stirrup side (diagonal)

1700 [mm]

Min. length of the stirrup side

100 [mm]

Length tolerance

± 1 [mm]

Bending tolerance

± 1°

Average electric power consumption

4 [KW]

Labeled electric power

17 [KW]

Voltage

380 [V] – 50 [Hz]

Overall machine weight

2590 [Kg]

Overall dimension

3100X1200X2100 [mm]

OUR EQUIPMENT

TJK is the largest manufacturer in reinforced rebar processing machinery in China.
Contact Us        

about us/100% SATISFACTION RATE.

TJK is the largest manufacturer in reinforced rebar processing machinery in China.
TJK Machinery was founded in 1993, to be a corporation company in 2002, registered capital is RMB 71,500,000, In 2015 TJK successfully listed on the new three board as a public company. TJK has own professional R&D team,daily engaged in research,development and design of new products, up to now has over 100 models, 500 technical patents, to lay the foundation of TJK leading position in China.

CONTACT US

Company staffs sincerely welcome all friends at home and abroad to visit our company discussing cooperation.

China TJK Machinery Beijing Co., Ltd.

Tel: +86 10-84927034
Fax: +86 10-84928449
Mobile: +86 13910833898
Email: sales@chinatjk.com
Add: Room 1006, Building No.2, North Star New Era Plaza, Beiyuan Road, Chaoyang District, Beijing 100107, China

LEAVE A MESSAGE

X